How To Remove Logo From Shirt

What You’ll Need

Before we get started, here are the items you’ll need to remove a logo from a shirt:

• Iron
• Ironing board
• Seam ripper
• Scissors
• Adhesive remover
• Cotton swabs
• White vinegar
• Baking soda
• Toothbrush
• Stain remover

Method 1: Seam Ripping

One of the easiest ways to remove a logo from a shirt is by using a seam ripper. Here’s how to do it:

1. Turn the shirt inside out and locate the stitches around the logo.
2. Use the seam ripper to carefully cut the stitches without damaging the fabric.
3. Once all the stitches have been removed, gently pull the logo off the shirt.
4. If there is any residue left from the logo, use an adhesive remover and cotton swabs to remove it.
5. Wash the shirt as usual to remove any remaining residue.

Method 2: Ironing

Ironing can also be used to remove a logo from a shirt. Here’s how to do it:

1. Turn the shirt inside out.
2. Place a clean cloth over the logo.
3. Set the iron to a low heat and iron over the cloth for a few seconds.
4. Remove the cloth and check if the logo has started to peel off.
5. If the logo is still intact, repeat the process with a slightly higher heat setting.
6. Once the logo has started to peel off, use your fingers to gently remove it from the shirt.
7. If there is any residue left from the logo, use an adhesive remover and cotton swabs to remove it.
8. Wash the shirt as usual to remove any remaining residue.

Method 3: Vinegar and Baking Soda

If you don’t have a seam ripper or an iron, you can also use a mixture of vinegar and baking soda to remove a logo from a shirt. Here’s how to do it:

1. Mix equal parts of vinegar and baking soda to make a paste.
2. Apply the paste to the logo and let it sit for a few minutes.
3. Use a toothbrush to gently scrub the logo.
4. Rinse the shirt with water to remove the paste.
5. If there is any residue left from the logo, use a stain remover and follow the instructions on the packaging.
6. Wash the shirt as usual to remove any remaining residue.

FAQs

Can I remove a logo from any type of fabric?

Most logos can be removed from cotton, polyester, and other common fabrics. However, some logos may be difficult to remove from delicate fabrics like silk or cashmere.

Will removing a logo damage my shirt?

If you follow the methods outlined in this article, you should be able to remove the logo without damaging your shirt. However, if the logo has been on the shirt for a long time, there may be some fading or discoloration around the area where the logo was.

What if the logo won’t come off?

If you’re having trouble removing a logo from a shirt, try using a combination of the methods outlined in this article. For example, you could try using a seam ripper to loosen the stitches, then use an iron to help peel off the logo.

Conclusion

Removing a logo from a shirt can be a daunting task, but with the right tools and techniques, it can be done. Whether you choose to use a seam ripper, an iron, or a mixture of vinegar and baking soda, be sure to follow the instructions carefully to avoid damaging your shirt. And if all else fails, don’t be afraid to take your shirt to a professional cleaner for help. With a little patience and persistence, you’ll have a logo-free shirt in no time!