How To Jump Your Car

Jumpstarting your car can be a lifesaver in a situation where your vehicle’s battery has died. Knowing how to jump your car can save you from being stranded on the side of the road. In this article, we’ll go over the steps to jumpstarting your car.

What You Will Need

To jumpstart your car, you will need a few things:

  • Jumper cables
  • Another car with a working battery
  • Protective gear, like gloves and safety glasses

Step 1: Prepare the Cars

Before you begin, make sure both cars are parked close enough to each other that the jumper cables can reach both batteries. Turn off both cars and put on your protective gear.

Step 2: Attach the Jumper Cables

Attach the jumper cables to the working car’s battery first. Connect the red cable to the positive (+) terminal and the black cable to the negative (-) terminal. Then, attach the other end of the red cable to the positive terminal of the dead battery. Finally, attach the black cable to an unpainted metal surface on the dead car, like a bolt or a bracket.

Step 3: Start the Working Car

Start the car with the working battery and let it run for a few minutes. This will allow the battery to charge up the dead battery.

Step 4: Start the Dead Car

Try starting the dead car. If it doesn’t start, wait a few more minutes and try again.

Step 5: Remove the Cables

Once the dead car has started, remove the cables in the reverse order that you attached them. Start with the black cable on the dead car, then the red cable on the dead car, then the red cable on the working car, and finally the black cable on the working car.

FAQs

Q: Is jumpstarting a car dangerous?

A: Jumpstarting a car can be dangerous if not done properly. Always wear protective gear and make sure the jumper cables are attached correctly.

Q: Can I jumpstart a car with a different size battery?

A: It’s best to use a car with a similar size battery, but in an emergency, you can jumpstart a car with a different size battery.

Q: How long should I let the working car run before trying to start the dead car?

A: Let the working car run for at least 5 minutes before trying to start the dead car.

Conclusion

Knowing how to jump your car can be a useful skill in case of emergencies. Always make sure you have the necessary equipment and protective gear before attempting to jumpstart your car. With the right steps, you can safely jumpstart your car and get back on the road.