Step 1: Prepare the Roof
Before installing roof drip edge, you need to prepare the roof. Remove any old roofing materials and debris from the roof’s edge. You also need to make sure the fascia board is in good condition and free of any rot or damage.
Step 2: Measure the Roof Edge
Measure the length of the roof edge where you will install the drip edge. You can use a tape measure to get the correct measurement. It is essential to have accurate measurements to ensure that you have enough drip edge to cover the entire roof edge.
Step 3: Cut the Drip Edge
Using a tin snip or metal cutting tool, cut the drip edge to the correct length. Make sure you cut the drip edge at a 90-degree angle to ensure a proper fit.
Step 4: Install the Drip Edge
Now it’s time to install the drip edge. Start at one end of the roof and nail the drip edge to the roof deck. Make sure you nail the drip edge every 12 inches. Continue installing the drip edge along the entire length of the roof edge.
Step 5: Overlap the Drip Edge
Overlap the drip edge by 1 inch at the corners. This will ensure that water does not seep through the corners and cause damage to the fascia board.
Step 6: Seal the Drip Edge
Seal the drip edge using roofing cement. Apply a generous amount of roofing cement under the drip edge and press it firmly against the roof deck. This will prevent any water from seeping under the drip edge and causing damage.
Step 7: Install the Shingles
After installing the drip edge, you can now install the shingles. Start at the bottom of the roof and work your way up. Make sure you overlap the shingles and nail them securely to the roof deck.
Step 8: Inspect the Drip Edge
Once you have installed the shingles, inspect the drip edge to ensure it is correctly installed. Check for any gaps or spaces between the drip edge and the roof deck. If you find any gaps, fill them with roofing cement.
FAQs
What is a roof drip edge?
A roof drip edge is an L-shaped metal flashing that sits at the edge of the roof, directing water away from the fascia board and into the gutter.
Why is a roof drip edge important?
A roof drip edge is essential because it prevents water from seeping under the shingles and causing damage to the fascia board.
What is the best material for a roof drip edge?
The best material for a roof drip edge is metal. It is durable, long-lasting, and can withstand harsh weather conditions.
Conclusion
Installing a roof drip edge is a crucial step in any roofing project. It helps to protect your home from water damage and ensures that your roof lasts for many years. By following the steps outlined in this article, you can install a roof drip edge correctly and with ease.