Step 1: Gather Your Tools
Before you begin, make sure you have the necessary tools. You’ll need the current code to the lock, the new code you want to set, and a screwdriver.
Step 2: Access the Programming Code
To change the code, you’ll need to access the programming code. On the interior side of the lock, locate the small programming code button. Once found, press the button using the tip of the screwdriver.
Step 3: Enter the Current Code
After pressing the programming code button, you should hear a beep. This indicates that you’re in programming mode. Enter the current 4 digit code on the lock using the keypad.
Step 4: Enter the New Code
Once the current code has been entered, press the “Schlage” button on the keypad. This will indicate that you’re in the process of changing the code. Now, enter the new 4 digit code you want to set.
Step 5: Test the New Code
After entering the new code, test it out to make sure it’s working properly. Enter the new code on the keypad and make sure the lock unlocks.
Frequently Asked Questions
What if I forget the current code?
If you forget the current code, you’ll need to reset the lock to its factory settings. To do this, locate the reset button on the lock and press it using the tip of the screwdriver. You’ll then need to follow the steps above to set a new code.
Can I set more than one code?
Yes, Schlage locks allow you to set up to 19 different codes. Follow the steps above for each new code you want to set.
What if the lock doesn’t beep when I press the programming code button?
If the lock doesn’t beep, check the batteries to make sure they’re working properly. If the batteries are dead, replace them and try again.
Conclusion
Changing the 4 digit code on your Schlage lock is a simple process that can help keep your home or office secure. Just follow the steps outlined above, and you’ll have a new code set in no time. Remember to keep your code private and change it regularly to ensure maximum security.