What You Will Need
Before diving into the process, you will need some tools to complete the task. Here’s a list of things you will need:
- Adjustable wrench
- Phillips head screwdriver
- Pliers
- Plumber’s putty
- New faucet
Step by Step Guide
Step 1: Turn Off the Water Supply
Before starting the process, make sure to turn off the water supply to avoid any accidents. You can turn off the water supply by closing the valve under the sink or by turning off the main water supply.
Step 2: Remove the Old Faucet
To remove the old faucet, you need to unscrew the mounting nuts that hold the faucet in place. You can use an adjustable wrench or pliers to do this. Once you unscrew the nuts, lift the faucet and remove it.
Step 3: Clean the Area
After removing the old faucet, you need to clean the area where you will be installing the new faucet. Use a clean cloth to wipe the area and make sure there is no debris left.
Step 4: Apply Plumber’s Putty
Now, apply plumber’s putty to the base of the new faucet. Make sure to apply it evenly around the base.
Step 5: Install the New Faucet
Carefully place the new faucet in the mounting holes and tighten the mounting nuts with a wrench or pliers. Make sure the faucet is level and properly aligned.
Step 6: Attach the Water Supply
Once you have installed the new faucet, it’s time to attach the water supply. Connect the water supply to the faucet and tighten the nuts with pliers.
Step 7: Turn On the Water Supply
After attaching the water supply, turn on the water supply valve and let the water run for a few minutes to check for any leaks.
FAQs
Q: Do I need to hire a plumber to change the faucet in my bathtub?
A: No, you can easily change the faucet in your bathtub by following the steps mentioned above.
Q: How much time does it take to change the faucet in a bathtub?
A: It usually takes around 30 minutes to an hour to change the faucet in a bathtub.
Q: Can I reuse the old mounting nuts?
A: It’s not recommended to reuse the old mounting nuts as they may be corroded or damaged.
Conclusion
Changing the faucet in your bathtub may seem like a daunting task, but with the right tools and steps, you can easily do it yourself. Just make sure to turn off the water supply, remove the old faucet, clean the area, apply plumber’s putty, install the new faucet, attach the water supply, and turn on the water supply to check for any leaks. Happy fixing!