How To Clean An Above Ground Pool

Maintaining a clean above ground pool is essential for its longevity and your enjoyment. A dirty pool can lead to algae growth, and bacteria accumulation can cause health issues. Here’s how to clean an above ground pool effectively.

1. Skim the Surface

The first step in cleaning an above ground pool is to skim the surface. Use a skimmer net to remove leaves, insects, and other debris. If you leave the debris in the pool, it can sink to the bottom and make cleaning more difficult.

2. Brush the Walls

After removing surface debris, use a pool brush to scrub the walls and floor of the pool. This will loosen dirt and algae, making it easier to remove. Be sure to brush all areas of the pool, including corners and steps.

3. Vacuum the Pool

Once you have brushed the pool, it’s time to vacuum it. Use a pool vacuum to remove the dirt and debris that has settled on the bottom of the pool. Move the vacuum slowly over the bottom of the pool, being sure to cover all areas.

4. Check and Adjust Chemical Levels

To keep your pool clean and safe, you need to maintain the right chemical balance. Check the pH and chlorine levels regularly and adjust them as necessary. The ideal pH level for a pool is between 7.2 and 7.8, and the chlorine level should be between 1 and 3 ppm.

5. Shock the Pool

If the pool has a lot of algae or bacteria, you may need to shock it. Shocking the pool means adding a large amount of chlorine to kill off any bacteria or algae. Follow the instructions on your pool shock product, and be sure to keep everyone out of the pool for at least 24 hours.

6. Backwash the Filter

The pool filter is essential for keeping the water clean. Over time, the filter can become clogged with dirt and debris, reducing its effectiveness. Backwashing the filter means reversing the flow of water to flush out the dirt and debris.

7. Clean the Filter

In addition to backwashing, you should also clean the pool filter regularly. Remove the filter and clean it with a hose or in a bucket of water. If the filter is very dirty, you may need to use a filter cleaner product.

8. Clean the Skimmer Basket

The skimmer basket catches debris before it enters the filter. Empty the skimmer basket regularly to keep it from overflowing and reducing the effectiveness of the skimmer.

9. Clean the Pump Basket

The pump basket catches debris before it enters the pump. Empty the pump basket regularly to keep it from overflowing and reducing the effectiveness of the pump.

10. Clean the Pool Deck

Cleaning the pool deck is essential for maintaining a clean pool. Dirt and debris on the deck can easily enter the pool and create a mess. Sweep the deck regularly and use a pressure washer to remove stubborn stains.


Q. How often should I clean my above ground pool?

A. You should clean your above ground pool at least once a week.

Q. How often should I backwash the filter?

A. You should backwash the filter whenever the pressure gauge on the filter reaches 10 psi higher than the normal operating pressure.

Q. How often should I shock the pool?

A. You should shock the pool at least once a month, or whenever the water looks cloudy or has a strong chlorine odor.


Cleaning an above ground pool is not difficult, but it does require regular maintenance. By following these steps, you can keep your pool clean and safe for your family and friends to enjoy. Remember to check the chemical levels regularly, backwash and clean the filter, and vacuum the pool regularly. With a little effort, you can enjoy a sparkling clean pool all season long.