How To Descale A Keurig 2.0 With Vinegar

How to descale a Keurig 2.0 with vinegar

If you’re a coffee lover, you know how important it is to keep your Keurig running smoothly. One of the most common problems with these machines is mineral buildup, which can cause clogs and affect the taste of your coffee. Fortunately, descaling your Keurig 2.0 with vinegar is a simple and inexpensive solution to this problem.

What you’ll need

Before you get started, make sure you have the following:

  • White vinegar
  • Water
  • A large ceramic mug
  • A clean cloth
  • A paperclip

Step-by-step instructions

1. Empty the water reservoir

First, make sure your Keurig is turned off and unplugged. Remove the water reservoir and empty any remaining water into the sink. Rinse the reservoir with warm water and set it aside.

2. Prepare the descaling solution

Fill the water reservoir halfway with white vinegar, and then fill it the rest of the way with water. Place the reservoir back onto the machine.

3. Run the descaling cycle

Turn on your Keurig and run a brew cycle without a K-cup. Make sure the mug is large enough to hold all of the liquid that will be dispensed. Repeat this process until the “add water” light comes on.

4. Let the machine sit

Leave your Keurig on for four hours or more, allowing the vinegar solution to work its way through the machine and dissolve any mineral buildup. You can use this time to clean the exterior of the machine with a damp cloth.

5. Run clean water through the machine

After four hours, empty the remaining solution from the water reservoir and fill it with clean water. Run a brew cycle without a K-cup several times to flush out any remaining vinegar. Once the water runs clear, your Keurig is ready to use again!


How often should you descale your Keurig?

You should descale your Keurig every three to six months, depending on how often you use it and the hardness of your water.

Can you use other types of descaling solutions?

Yes, there are many commercial descaling solutions available, but white vinegar is a safe and effective option that won’t damage your machine.

Why is my Keurig still not working after descaling?

If your Keurig is still not working after descaling, there may be another issue with the machine. Contact Keurig customer service for assistance.

Can you use apple cider vinegar instead of white vinegar?

No, apple cider vinegar is not recommended for descaling your Keurig. Stick with white vinegar for best results.


Descaling your Keurig 2.0 with vinegar is a simple and effective way to keep your machine running smoothly and ensure that your coffee always tastes great. With just a few basic supplies and some easy-to-follow instructions, you can have your Keurig back to its best in no time!