Tools You’ll Need
Before you start, make sure you have these tools on hand:
- Drywall saw
- Drywall tape
- Drywall mud
- Trowel or putty knife
- Paint and paintbrush
Step 1: Cut Out the Damaged Drywall
The first step in how to fix a big hole in drywall is to cut out the damaged area. Use a drywall saw to cut a square or rectangular shape around the hole. Make sure the edges are straight and smooth.
Step 2: Cut a Patch
Next, cut a patch from a piece of drywall that is slightly larger than the hole you cut out. Hold the patch up to the hole and trace around it with a pencil.
Step 3: Install the Patch
Apply drywall tape around the edges of the hole. Then, apply a thin layer of drywall mud over the tape. Place the patch over the hole and press it firmly into place. Hold it there for a few minutes until the mud starts to dry.
Step 4: Apply More Mud
Apply a second, thicker layer of mud over the patch. Use a trowel or putty knife to smooth it out and make it level with the surrounding wall. Let it dry completely.
Step 5: Sand and Paint
Once the mud is dry, sand it smooth with fine-grit sandpaper. Then, paint the patch to match the surrounding wall.
Q: How long will it take to fix a big hole in drywall?
A: It depends on the size of the hole and the amount of damage. Small holes can be fixed in a few hours, while larger holes may take a day or two.
Q: Do I need to hire a professional to fix a big hole in drywall?
A: Not necessarily. If you have some DIY experience and the right tools, you can fix a big hole in drywall yourself.
Q: What if I don’t have all the tools I need?
A: You can buy or rent the tools you need from a hardware store, or borrow them from a friend or neighbor.
Fixing a big hole in drywall may seem daunting, but it’s actually a simple process that anyone can do. With the right tools and a bit of patience, you can restore your walls to their former glory in no time.