How To Get A Small Dent Out Of A Car

When it comes to owning a car, accidents are bound to happen. One of the most common accidents is getting a small dent in your car. Whether it’s because someone accidentally hit your car or you accidentally hit a pole, it’s a frustrating and annoying experience. However, don’t worry because there are plenty of ways to get a small dent out of a car. In this article, we’ll be sharing some tips and tricks on how to get a small dent out of a car.

Using a Plunger

One of the easiest and cheapest ways to get a small dent out of a car is by using a plunger. Yes, you read that right! A plunger that you use in your bathroom can be used to get a small dent out of your car. Start by wetting the plunger and the area around the dent. Then, place the plunger over the dent and push and pull the plunger until the dent pops out. It may take a few tries, but it’s an effective method.

Using Boiling Water

Another effective method to get a small dent out of a car is by using boiling water. This method works best for plastic bumpers. Start by boiling a pot of water and pouring it over the dent. Then, use a plunger or your hands to push the dent out from the inside. Be careful not to burn yourself with the hot water.

Using a Hair Dryer and Compressed Air

If you don’t have access to boiling water, you can use a hairdryer and compressed air to get a small dent out of a car. Start by heating the dent with a hairdryer for a few minutes until it’s hot to the touch. Then, turn a can of compressed air upside down and spray the dent for 30 seconds. The cold air from the compressed air can cause the metal to contract, and the dent may pop out.

Using a Vacuum Cleaner and Bucket

Another method to get a small dent out of a car is by using a vacuum cleaner and a bucket. Start by creating a small hole in the bottom of the bucket. Then, place the bucket over the dent and seal it with duct tape. Next, use the vacuum cleaner to suck the air out of the bucket. The suction will pull the dent out of the car.

Using a Hammer and Dolly

If you’re feeling handy, you can use a hammer and dolly to get a small dent out of a car. A dolly is a small anvil-like tool that’s used to support the metal while you’re hammering it. Start by placing the dolly behind the dent and tapping the dent out with a hammer. Be gentle and take your time as you don’t want to cause more damage to your car.

Using a Dent Puller

A dent puller is a tool that’s specifically designed to get a small dent out of a car. It uses suction to pull the dent out of the car. Start by placing the dent puller over the dent and pulling the handle towards you. The suction will pull the dent out.

FAQs

Can I use a plunger on any type of dent?

A plunger works best on small dents that are not too deep. It may not work on larger dents or dents that are on the edges of your car.

Can I use boiling water on any type of car?

Boiling water works best on plastic bumpers. It may not work on metal or fiberglass cars.

Can I use a dent puller on any type of dent?

A dent puller works best on small dents that are not too deep. It may not work on larger dents or dents that are on the edges of your car.

Conclusion

Getting a small dent out of a car may seem like a daunting task, but it’s actually quite simple. You can use everyday household items like a plunger or boiling water, or you can use specialized tools like a dent puller or a hammer and dolly. Whatever method you choose, be patient, take your time, and be careful not to cause more damage to your car. With these tips and tricks, you’ll have your car looking like new in no time.