How To Hang Pre-Pasted Wallpaper

If you’re looking to spruce up your walls without breaking the bank, pre-pasted wallpaper is a great option. It’s easy to install, and you don’t need any fancy tools or equipment. In this article, we’ll go over the steps for how to hang pre-pasted wallpaper, so you can create a beautiful new look in your home.

Gather Your Supplies

Before you begin, make sure you have all the necessary supplies. You’ll need:

  • Pre-pasted wallpaper
  • Water
  • Sponge or roller
  • Measuring tape
  • Straightedge or level
  • Razor knife or scissors
  • Smoothing tool
  • Wallpaper brush

Prepare Your Walls

Before you start hanging your wallpaper, you need to prepare your walls. Make sure they’re clean and free of any dirt, dust, or debris. Fill in any holes or cracks with spackle and sand them smooth. If you’re painting the walls first, make sure the paint is completely dry before you start hanging the wallpaper.

Measure Your Wallpaper

Measure the height of your wall, then add a few inches to that measurement to allow for trimming at the top and bottom. Unroll your wallpaper and measure out the length you need for your wall. Cut your wallpaper to size using your straightedge and razor knife or scissors.

Activate the Paste

Activate the paste on the back of your wallpaper by wetting it with water. You can use a sponge or roller to do this. Be sure to get the entire back of the wallpaper wet, but don’t soak it.

Hang Your Wallpaper

Starting at the top of your wall, line up your wallpaper with the edge of your wall. Use your smoothing tool to press the wallpaper onto the wall, starting from the center and working your way out to the edges. Make sure there are no air bubbles or wrinkles in the wallpaper.

Trim the Excess

Once you’ve hung your wallpaper, use your straightedge and razor knife or scissors to trim off any excess at the top and bottom of the wall. Be sure to leave a little extra at the top and bottom to allow for any unevenness in your ceiling or floor.

Repeat the Process

Repeat the process for the rest of your walls, making sure to match up the pattern as you go. Be sure to keep your wallpaper straight and level as you hang it.


Q: Can I hang pre-pasted wallpaper over existing wallpaper?


No, it’s not recommended to hang pre-pasted wallpaper over existing wallpaper. The old wallpaper can cause the new wallpaper to bubble or peel over time.

Q: Do I need to prime my walls before hanging pre-pasted wallpaper?


No, you don’t need to prime your walls before hanging pre-pasted wallpaper. However, if your walls are very dark or have a lot of imperfections, it may be a good idea to prime them first.

Q: How do I remove pre-pasted wallpaper?


To remove pre-pasted wallpaper, simply wet it with warm water using a sponge or spray bottle. Let it sit for a few minutes to loosen the paste, then gently peel it off. If the wallpaper is stubborn, you can use a wallpaper steamer to help loosen the paste.


Now that you know how to hang pre-pasted wallpaper, you can transform your walls in no time. With just a few simple steps and some basic supplies, you can create a beautiful new look in your home that you’ll love for years to come.