How To Install Drywall Anchor

Drywall anchors are essential for hanging heavy objects on drywall walls. But, installing them can be a daunting task, especially for beginners. In this article, we will guide you on how to install drywall anchor easily and quickly.

What is a Drywall Anchor?

A drywall anchor is a device that helps you mount heavy objects on drywall walls. It is used when the object you want to hang is too heavy for the drywall to support on its own.

Types of Drywall Anchors

There are several types of drywall anchors available in the market. Some of the most commonly used ones include toggle bolts, plastic anchors, and molly bolts. The type of anchor you choose will depend on the weight of the object you want to hang.

How to Install Drywall Anchor

Before installing a drywall anchor, you need to gather the following tools:

  • Drill
  • Hammer
  • Screwdriver
  • Drywall anchor
  • Screws

Once you have the necessary tools, follow these steps to install a drywall anchor:

Step 1: Choose the Right Anchor

Choose an anchor that is appropriate for the weight of the object you want to hang. Refer to the anchor’s packaging for weight specifications and select an anchor that can support the weight.

Step 2: Mark the Spot

Using a pencil, mark the spot where you want to install the anchor. Make sure the spot is level and at the desired height.

Step 3: Drill a Hole

Using a drill bit that is slightly smaller than the anchor, drill a hole into the drywall at the marked spot. Make sure the hole is deep enough to accommodate the anchor.

Step 4: Insert the Anchor

Insert the anchor into the hole and tap it gently with a hammer until it is flush with the wall.

Step 5: Screw in the Screw

Using a screwdriver, screw in the screw into the anchor until it is tight. Do not over-tighten the screw as it may damage the anchor or the drywall.


Q: How much weight can a drywall anchor hold?

A: The weight capacity of a drywall anchor depends on the type of anchor used. Refer to the packaging for weight specifications.

Q: Can I reuse a drywall anchor?

A: No, it is not recommended to reuse a drywall anchor as it may lose its strength and may not be able to support the weight.

Q: How do I remove a drywall anchor?

A: To remove a drywall anchor, simply unscrew the screw, and pull the anchor out with pliers. If the anchor is stuck, gently tap it with a hammer to loosen it.


Installing a drywall anchor may seem intimidating, but it is a straightforward process. By following the steps outlined in this article, you can easily install a drywall anchor and hang heavy objects on your drywall walls. Remember to choose the right anchor for the weight of the object, and do not over-tighten the screw.