How To Make Cabinet Door: A Complete Guide

If you’re looking to give your kitchen or bathroom a facelift, replacing your cabinet doors is a great way to start. It’s a DIY project that anyone can take on, and it can save you a lot of money compared to buying new cabinets. In this article, we’ll show you how to make cabinet doors step-by-step, so you can get started on your project today.

What You’ll Need

Before you begin, gather the following materials:

  • Table saw or circular saw
  • Router
  • Router bit set
  • Drill and drill bits
  • Clamps
  • Wood glue
  • Sandpaper
  • Wood stain or paint
  • Cabinet door handles or knobs

Step 1: Measure Your Cabinets

The first step in making your cabinet doors is to measure the openings where the doors will go. Measure the width and height of each opening, and make note of the measurements.

Step 2: Choose Your Wood

Next, choose the type of wood you want to use for your cabinet doors. Popular choices include oak, maple, and cherry. You can buy pre-cut wood or cut your own from a larger piece.

Step 3: Cut Your Wood

Using a table saw or circular saw, cut your wood to the measurements you took in step 1. Be sure to cut each piece to the exact same size.

Step 4: Create the Panel Groove

Using a router and a router bit set, create a groove around the inside perimeter of each piece of wood. This will be where the panel will sit.

Step 5: Cut the Panel to Size

Cut your panel to size using a table saw or circular saw. The panel should fit snugly into the groove you created in step 4.

Step 6: Glue the Panel in Place

Apply wood glue to the groove and insert the panel. Clamp the pieces together and let the glue dry for several hours.

Step 7: Sand the Doors

Once the glue has dried, remove the clamps and sand the doors using sandpaper. Start with a coarse grit and work your way up to a finer grit for a smooth finish.

Step 8: Stain or Paint the Doors

Choose a stain or paint color that complements your cabinets and apply it to the doors. Follow the manufacturer’s instructions and let the doors dry completely.

Step 9: Install the Doors

Attach the cabinet door handles or knobs to the doors, and then attach the doors to your cabinets using hinges. Make any necessary adjustments to ensure the doors hang straight and close properly.


Q: Do I need any special tools to make cabinet doors?

A: You’ll need a table saw or circular saw, a router, drill, and clamps. You may also need a router bit set and sandpaper.

Q: How much does it cost to make cabinet doors?

A: The cost will vary depending on the type of wood you choose and the size of your cabinets. However, making your own cabinet doors can save you a significant amount of money compared to buying new cabinets.

Q: Can I make cabinet doors without a router?

A: While a router is the easiest way to create the panel groove, you can also use a table saw or circular saw with a dado blade to make the groove.


Making your own cabinet doors is a fun and rewarding DIY project. With the right tools and materials, anyone can do it. Follow these steps and you’ll have beautiful new cabinet doors in no time.