Measuring the Width
The first step in measuring for a sliding screen door is to measure the width of the opening. To do this, you need to measure from the inside of the left frame to the inside of the right frame. Make sure to measure at the top, middle and bottom of the opening to ensure that you get the correct width.
Taking the Height
Next, you need to measure the height of the opening. To do this, measure from the inside of the top frame to the inside of the bottom frame. Again, make sure to measure at the left, center and right of the opening to ensure accuracy.
Measuring for the Track
After measuring the width and height, you need to measure for the track. The track is the part of the door that slides along the bottom of the frame. To measure for the track, measure the width of the opening at the bottom, where the track will be installed.
Measuring the Depth
In addition to measuring the width of the track, you also need to measure the depth. The depth is the distance from the bottom of the track to the top of the track. This measurement will ensure that the track fits securely in the frame.
Measuring for the Handle
Once you have the measurements for the door and track, you need to measure for the handle. The handle is the part of the door that you use to slide it open and closed. To measure for the handle, measure the distance from the center of the handle to the edge of the door.
Measuring for the Lock
If your sliding screen door has a lock, you also need to measure for that. To do this, measure the distance from the center of the lock to the edge of the door. This will ensure that the lock lines up with the frame properly.
FAQs
What if my measurements are between sizes?
If your measurements fall between sizes, always round up to the next size. It’s easier to adjust a door that is slightly too big than to try to fill gaps from a door that is too small.
Do I need to account for the thickness of the frame?
No, you do not need to account for the thickness of the frame. Simply measure from the inside of the frame to the inside of the opposite frame.
What if my opening is not square?
If your opening is not perfectly square, use the smallest measurement for both the width and height. This will ensure that the door fits securely in the frame.
Conclusion
Measuring for a sliding screen door may seem like a daunting task, but with these simple steps, it can be a breeze. Remember to measure the width, height, track, handle and lock (if applicable) and always round up to the next size if necessary. With the right measurements, you’ll have a perfectly fitting screen door in no time.