How To Nail Baseboards

How to Nail Baseboards – A Step by Step Guide

If you’re looking to give your home a fresh, updated look, installing new baseboards is a great place to start. Not only do they add a finishing touch to your walls, but they also serve a functional purpose of protecting the base of your walls from damage. Here’s a step by step guide on how to nail baseboards:

Step 1: Measure and Cut Baseboards

The first step in nailing baseboards is to measure the length of the walls where you’ll be installing them. Use a tape measure to get an accurate measurement, and then transfer that measurement onto your baseboard. Use a saw to cut the baseboard to the correct length.

Step 2: Sand the Edges of Baseboards

Once your baseboards are cut to the correct length, use sandpaper to smooth out any rough edges. This will help the baseboards fit together seamlessly and create a polished look.

Step 3: Mark Stud Locations

Next, use a stud finder to locate the studs in the wall where you’ll be installing the baseboards. Once you’ve located the studs, use a pencil to mark their location on the wall. This will help you know where to nail the baseboards into the wall.

Step 4: Position Baseboards

With your baseboards cut and sanded, and your stud locations marked, it’s time to position the baseboards on the wall. Start at one end of the wall and hold the baseboard in place, making sure it’s level. Use a pencil to mark the top of the baseboard where it meets the wall.

Step 5: Apply Adhesive

Before nailing the baseboards to the wall, apply a small amount of adhesive to the back of each board. This will help hold the baseboards in place and prevent them from shifting over time.

Step 6: Nail the Baseboards

Using a nail gun or hammer, nail the baseboards to the wall at each stud location. Be sure to nail at an angle to ensure a secure hold. Repeat this process for each baseboard along the wall.

Step 7: Fill Nail Holes

Once all the baseboards are nailed to the wall, use wood filler to fill in any nail holes. Allow the filler to dry completely, and then sand it down until it’s smooth and level with the rest of the baseboard.

Step 8: Paint or Stain Baseboards

With the nail holes filled, it’s time to paint or stain your baseboards. Choose a color or finish that complements your walls and other trim in your home.


Q: Can I install baseboards without a nail gun?

A: Yes, you can use a hammer and nails to install baseboards. It will just take longer and may not be as secure as using a nail gun.

Q: What kind of adhesive should I use to hold the baseboards in place?

A: Use a construction adhesive specifically designed for baseboards and trim. Be sure to follow the manufacturer’s instructions for application.

Q: How do I know if my baseboards are level?

A: Use a level to ensure that your baseboards are straight and level along the wall. If they’re not level, adjust them as needed before nailing them to the wall.

Q: Can I reuse old baseboards?

A: It’s possible to reuse old baseboards, but it’s important to make sure they’re in good condition and free from any damage before installing them. If they’re warped or damaged, it’s best to install new baseboards.


Nailing baseboards is a simple and rewarding DIY project that can give your home a fresh, updated look. By following these easy steps, you can install baseboards like a pro and enjoy the finished results for years to come.