How To Put Jumper Cables On Battery

Jumpstarting a car is something that every driver should know how to do. Sometimes car batteries die unexpectedly, and you need to know how to jumpstart your car to get it going again. In this article, we will show you how to put jumper cables on battery in a few simple steps.

What You’ll Need

Before we jump into the process of jumpstarting your car, let’s first talk about what you’ll need to get started. Here are the items you will need:

  • Jumper cables
  • Another car with a working battery
  • Gloves (optional)

Step One: Position the Cars

The first step in jumpstarting your car is to position the cars so that the batteries are close enough to connect the jumper cables. Park the working car next to your car, close enough so that the jumper cables can reach both batteries. Make sure both cars are turned off and in park.

Step Two: Connect the Jumper Cables

Now that the cars are positioned correctly, it’s time to connect the jumper cables. Here are the steps to follow:

  1. Open the hoods of both cars and locate the batteries.
  2. Attach one end of the red jumper cable to the positive terminal on your car’s dead battery.
  3. Attach the other end of the red jumper cable to the positive terminal on the working car’s battery.
  4. Attach one end of the black jumper cable to the negative terminal on the working car’s battery.
  5. Attach the other end of the black jumper cable to an unpainted metal surface on your car, such as a bolt or bracket near the dead battery.

Step Three: Start the Cars

Now that the jumper cables are connected, it’s time to start the cars. Here are the steps to follow:

  1. Start the working car and let it run for a few minutes.
  2. Try to start your car. If it doesn’t start, wait another minute or two and try again.
  3. Once your car starts, let both cars run for a few minutes to ensure that the dead battery has enough charge.

Step Four: Disconnect the Jumper Cables

The final step in jumpstarting your car is to disconnect the jumper cables. Here are the steps to follow:

  1. Turn off both cars.
  2. Remove the black jumper cable from your car’s battery.
  3. Remove the black jumper cable from the working car’s battery.
  4. Remove the red jumper cable from the working car’s battery.
  5. Remove the red jumper cable from your car’s battery.

Frequently Asked Questions

What is the proper order for connecting jumper cables?

The proper order for connecting jumper cables is as follows:

  1. Attach one end of the red jumper cable to the positive terminal on the dead battery.
  2. Attach the other end of the red jumper cable to the positive terminal on the working car’s battery.
  3. Attach one end of the black jumper cable to the negative terminal on the working car’s battery.
  4. Attach the other end of the black jumper cable to an unpainted metal surface on your car.

Can I jumpstart my car with just one jumper cable?

No, you cannot jumpstart your car with just one jumper cable. You need both a red and black jumper cable to properly jumpstart your car.

Can I jumpstart my car if the other car has a smaller battery?

Yes, you can jumpstart your car if the other car has a smaller battery. However, it may take longer for your car to start if the other car’s battery is smaller.

Conclusion

Now that you know how to put jumper cables on battery, you can jumpstart your car with confidence the next time your battery dies unexpectedly. Remember to follow these steps carefully and always be cautious when working with car batteries. With a little practice, jumpstarting your car will be a breeze.