Have you ever experienced a situation where your window screens fell off or got damaged? It can be quite frustrating and inconvenient, especially during the warm summer months when you want to keep your windows open. Fortunately, putting screens back into windows is not as difficult as it may seem. In this article, we will guide you through the process of how to put screens back into windows.
What You Will Need
Before you start, you will need a few tools to help you with the process. Here are the things you will need:
- Screen spline tool
- Replacement screen material
- Utility knife
- Tape measure
- Scissors
- Flathead screwdriver
Step-by-Step Guide: How to Put Screens Back into Windows
Step 1: Remove the Damaged Screen
The first step in replacing a window screen is to remove the damaged screen. You can do this by gently prying it out of the frame using a flathead screwdriver. Be careful not to damage the frame or the surrounding area.
Step 2: Measure the Replacement Screen Material
Next, you need to measure the size of the replacement screen material. Use a tape measure to measure the dimensions of the frame. Make sure you add an extra inch to each side to allow for a margin of error.
Step 3: Cut the Replacement Screen Material
Using a pair of scissors or a utility knife, cut the replacement screen material according to the measurements you took in the previous step. Be sure to cut it slightly larger than the frame to ensure a snug fit.
Step 4: Install the Replacement Screen Material
Now, it’s time to install the replacement screen material. Place it over the frame and use a screen spline tool to push the material into the frame’s grooves. Be sure to work your way around the entire frame, pushing the spline into the grooves as you go.
Step 5: Trim the Excess Screen Material
Once you have installed the replacement screen material, use a utility knife to trim any excess material that hangs over the frame. Be sure to cut it as close to the spline as possible.
Step 6: Reinstall the Screen
Finally, it’s time to reinstall the screen. Place it back into the frame and use a flathead screwdriver to secure it in place. Repeat this process for any other screens that need replacing.
FAQs
Q: How do I know if my window screen needs to be replaced?
A: There are a few signs that your window screen may need to be replaced. These include visible damage such as holes or tears, a sagging or loose fit in the frame, or if it has become discolored or faded over time.
Q: Do I need to replace my entire window if the screen is damaged?
A: No, you do not need to replace your entire window if the screen is damaged. You can easily replace the screen yourself or have it replaced by a professional.
Q: Can I reuse the old spline when replacing a window screen?
A: It is not recommended to reuse the old spline when replacing a window screen. Over time, the spline can become brittle and may not hold the screen material securely in place. It’s best to use new spline when replacing a screen.
Conclusion
Putting screens back into windows is a simple process that can be done in a few easy steps. By following this guide, you can replace your damaged screens and enjoy the fresh air without any inconvenience. Remember to take your time and be careful not to damage the frame or the surrounding area. With a little patience and the right tools, you can easily put screens back into windows.