Why You Need to Raise Sprinkler Head
There are several reasons why you may need to raise or adjust the height of your sprinkler heads. Firstly, if the grass in your lawn has grown taller, the sprinkler head may not be able to reach it properly. Secondly, if the sprinkler head is too low, it may get damaged by a lawnmower or other equipment. Lastly, if the sprinkler head is too high, it may not distribute water evenly, leading to dry patches in your lawn.
Tools You Will Need
Before you start raising your sprinkler head, you will need a few tools. These include:
- A shovel or a trenching tool
- A pair of pliers
- A new riser
Step-by-Step Guide: How to Raise Sprinkler Head
Now that you have gathered the necessary tools, follow these steps to raise your sprinkler head:
Step 1: Dig a Trench Around the Sprinkler Head
Using your shovel or trenching tool, dig a trench around the sprinkler head. The trench should be wide enough to give you enough space to work in.
Step 2: Turn off the Water Supply
Before you start working on the sprinkler head, turn off the water supply to avoid any accidents. You can turn off the water supply either at the main valve or at the valve that controls the sprinkler system.
Step 3: Remove the Old Riser
Using your pliers, unscrew the old riser from the sprinkler head. Be careful not to damage the sprinkler head or the pipes underneath.
Step 4: Attach the New Riser
Attach the new riser to the sprinkler head, making sure that it is screwed on tightly. You can adjust the height of the riser according to your needs.
Step 5: Fill the Trench
Fill the trench with soil, making sure that the new riser is straight and level.
Step 6: Turn on the Water Supply
Turn on the water supply and check if the sprinkler head is working properly. If not, adjust the height of the riser until it reaches the desired height.
FAQs: How to Raise Sprinkler Head
Q: How often should I raise my sprinkler head?
A: You should raise your sprinkler head whenever the grass in your lawn grows taller or if you notice any dry patches in your lawn.
Q: Can I raise the sprinkler head without digging a trench?
A: No, you need to dig a trench around the sprinkler head to access the pipes and the riser.
Q: Do I need to replace the entire sprinkler head?
A: No, you only need to replace the riser, which is the part that connects the sprinkler head to the pipes.
Conclusion
Raising a sprinkler head is a simple task that can be done with a few tools and some basic knowledge. By following the steps outlined in this article, you can easily adjust the height of your sprinkler head and ensure that your lawn gets the right amount of water it needs. Remember to always turn off the water supply before working on your sprinkler system to avoid any accidents.