Step 1: Remove the Old Screen
The first step in rescreening a door is to remove the old screen. Use a flathead screwdriver to pry out the spline that holds the screen in place. Once the spline is removed, carefully pull out the old screen and discard it.
Step 2: Measure the New Screen
After removing the old screen, measure the frame to determine the size of the new screen. Cut the new screen to fit the frame with a few extra inches on each side.
Step 3: Install the New Screen
Lay the new screen over the frame and use a screen roller to press the spline into the groove, securing the screen in place. Work your way around the frame, pulling the screen taut as you go. Trim the excess screen with a utility knife.
Step 4: Reinstall the Door
Once the new screen is installed, reattach the door to the frame. Make sure the hinges are properly aligned and tighten the screws.
FAQs
Q: How often should I rescreen my door?
A: It depends on the wear and tear of your screen. If you live in an area with frequent storms or strong winds, you may need to rescreen more often. Otherwise, you can expect to rescreen every few years.
Q: Can I rescreen a door myself?
A: Yes, rescreening a door is a simple DIY project that can be done in a few hours.
Q: What tools do I need for rescreening?
A: You will need a flathead screwdriver, screen roller, utility knife, and new screen material.
Tips for Rescreening a Door
– Make sure to choose the right screen material for your needs. Fiberglass screens are the most common and affordable option, but aluminum screens are more durable and resistant to weather. – Work carefully to avoid tearing the new screen material. – Use a screen roller to ensure the screen is properly secured in the frame. – Take your time to ensure the screen is taut and smooth.
Conclusion
Rescreening a door is a simple and affordable way to improve the look and functionality of your home. With the right tools and a little patience, you can easily rescreen your own door and enjoy the benefits of a fresh, new screen.