How To Start Snowblower: A Beginner's Guide

Winter is here, and so is the snow. As much as we enjoy winter sports and snowball fights, the snow can be a nuisance when it comes to clearing our driveways and walkways. One of the most effective ways to get rid of snow is by using a snowblower. In this article, we will guide you through the process of how to start snowblower.

Before You Start

Before jumping into the steps of how to start snowblower, let’s go through some of the basics. Firstly, it is important to have your snowblower fueled up and ready to go. Check the oil level and add more if needed. Make sure you have your safety gear on, which includes gloves, goggles, and ear protection.

Step 1: Prepare the Snowblower

To start the snowblower, you must first prepare it. Turn the fuel valve on and make sure the choke is on. If your snowblower has an electric starter, plug it in and let it charge for a few minutes. If you have a pull-start snowblower, check if the cord is in good condition.

Step 2: Prime the Engine

To prime the engine, locate the primer bulb on the side of the snowblower’s engine. Press it three to four times until you see fuel moving into the carburetor. This will help start the snowblower quickly.

Step 3: Start the Engine

If your snowblower has an electric starter, press the button to start the engine. If it has a pull cord, hold the handle and pull the cord slowly until you feel resistance. Then, pull it quickly and firmly. Repeat this until the engine starts.

Step 4: Warm Up the Engine

Let the engine run for a few minutes to warm up. This will help it run more smoothly and efficiently. Also, make sure to turn off the choke once the engine is running.

Step 5: Engage the Auger

Now that the engine is running, it’s time to engage the auger. This is the part that does the actual snow removal. To do this, locate the lever that says “auger” or “drive.” Pull it towards you to engage the auger.

Step 6: Start Clearing the Snow

You are now ready to start clearing the snow. Move the snowblower slowly and steadily, making sure not to overload it with too much snow at once. Use the chute to direct the snow in the desired direction.

Frequently Asked Questions

Q: How often should I change the oil in my snowblower?

A: It is recommended to change the oil in your snowblower at least once a year, before the winter season starts.

Q: Can I use regular gasoline in my snowblower?

A: No, it is recommended to use gasoline with an octane rating of 87 or higher, and ethanol-free if possible. This will help prevent engine damage and ensure better performance.

Q: How do I prevent clogging in the snowblower chute?

A: To prevent clogging, make sure to clear the chute periodically while using the snowblower. You can also apply a non-stick spray to the inside of the chute before use.


Now that you know how to start snowblower, you are ready to tackle the snow and keep your driveway and walkways clear. Remember to always prioritize safety and proper maintenance to ensure your snowblower runs smoothly and efficiently. Happy snow clearing!